A research record,
across the years.

S.K. Georgantzinos, N.K. Anifantis, An insight into breathing mechanism of a crack in a rotating shaft, Journal of Sound and Vibration, 318, 279-295, 2008.

S.K. Georgantzinos, G.I. Giannopoulos, N.K. Anifantis, An efficient numerical model for vibration analysis of single-walled carbon nanotubes, Computational Mechanics, 43, 731-741, 2009.

S.K. Georgantzinos, N.K. Anifantis, Vibration analysis of multi-walled carbon nanotubes using a spring-mass based finite element model, Computational Materials Science, 47, 168-177, 2009.

S.K. Georgantzinos, G.I. Giannopoulos, N.K. Anifantis, Investigation of stress-strain behavior of single walled carbon nanotube/rubber composites by a multi-scale finite element method, Theoretical and Applied Fracture Mechanics, 52(3), 158-164, 2009.

S.K. Georgantzinos, N.K. Anifantis, Carbon nanotube based resonant mechanical sensors: A computational investigation of their behaviour, Physica E: Low-dimensional Systems and Nanostructures, 42(5), 1795-1801, 2010.

G.I. Giannopoulos, S.K. Georgantzinos, D.E. Katsareas, N.K. Anifantis, Numerical prediction of mechanical behavior of carbon nanotube composites incorporating nanostructural and interfacial effects, Computer Modeling in Engineering and Science, 56 231-247, 2010.

S.K. Georgantzinos, G.I. Giannopoulos, N.K. Anifantis, Effective Young's modulus of carbon nanotube composites: From multi-scale finite element predictions to an analytical rule, Journal of Computational and Theoretical Nanoscience, 7(8), 1436-1442, 2010.

S.K. Georgantzinos, G.I. Giannopoulos, N.K. Anifantis, Numerical investigation of elastic mechanical properties of graphene structures, Materials and Design, 31(10) 4646-4654, 2010.

S.K. Georgantzinos, G.I. Giannopoulos, D.E. Katsareas, P.A Kakavas, N.K. Anifantis, Finite element simulation and characterization of nanostructured textiles, World Journal of Engineering, 7(2), 256-258, 2010.

S.K. Georgantzinos, G.I. Giannopoulos, D.E. Katsareas, P.A Kakavas, N.K. Anifantis, Finite element modeling of an interweaved carbon nanotube structure, World Journal of Engineering, 7(2), 259-265, 2010.

G.I. Giannopoulos, S.K. Georgantzinos, N.K. Anifantis, A semi-continuum finite element approach to evaluate the Young's modulus of single walled carbon nanotube-based composites, Composites Part B:Engineering, 41(8), 594-601, 2010.

S.K. Georgantzinos, G.I. Giannopoulos, N.K. Anifantis, On the coupling of axial and shear deformations of single-walled carbon nanotubes and graphene: a numerical study, Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanoengineering and Nanosystems, 224(4), 163-172, 2010.

S.K. Georgantzinos, G.I. Giannopoulos, D.E. Katsareas, P.A Kakavas, N.K. Anifantis, Size-dependent nonlinear mechanical properties of graphene nanoribbons, Computational Materials Science, 50(7) 2057-2062, 2011.

S.K. Georgantzinos, D.E. Katsareas, N.K. Anifantis, Graphene characterization: A fully nonlinear spring based finite element prediction, Physica E: Low-dimensional Systems and Nanostructures, 43(10), 1833-1839, 2011.

S.K. Georgantzinos, D.E. Katsareas, N.K. Anifantis, Limit load analysis of graphene with pinhole defects: A nonlinear structural mechanics approach, International Journal of Mechanical Sciences, 55(1) 85-94, 2012.

A.S. Tsiamaki, S.K. Georgantzinos, N.K. Anifantis, Vibrations of circular graphene mono-layer as mass sensor, SL: Structural Longevity 8(1), 15-21, 2012.

G.I. Giannopoulos, A.P. Tsiros, S.K. Georgantzinos, Prediction of elastic mechanical behavior and stability of single-walled carbon nanotubes using bar elements, Mechanics of Advanced Materials and Structures, 20(9), 730-741, 2013.

G.I. Giannopoulos, S.K. Georgantzinos, P.A. Kakavas, N.K. Anifantis, Radial stiffness and natural frequencies of fullerenes via a structural mechanics spring based method, Fullerenes, Nanotubes and Carbon Nanostructures, 21(3), 248-257, 2013.

S.K. Georgantzinos, G.I. Giannopoulos, N.K. Anifantis, Mechanical vibrations of carbon nanotube based mass sensors: An analytical approach, Sensor Review, 34(3), 319-326, 2014.

S.K. Georgantzinos, G.I. Giannopoulos, N.K. Anifantis, The effect of atom vacancy defect on the vibrational behavior of single-walled carbon nanotubes: A structural mechanics approach, Advances in Mechanical Engineering, 2014, 291645, 2014.

K.N. Spanos, S.K. Georgantzinos, N.K. Anifantis, Investigation of stress transfer in carbon nanotube reinforced composites using a multi-scale finite element approach, Composites Part B: Engineering, 63, 85-93, 2014.

A.S. Tsiamaki, S.K. Georgantzinos, N.K. Anifantis, Monolayer graphene resonators for mass detection: A structural mechanics feasibility study, Sensors and Actuators: A Physical, 217, 29-38, 2014.

G.I. Giannopoulos, S.K. Georgantzinos, N.K. Anifantis, Coupled vibration response of a shaft with a breathing crack, Journal of Sound and Vibration, 336, 191-206, 2015.

S.K.Georgantzinos, G.I. Giannopoulos, P.K. Pierou, N.K. Anifantis, Numerical stability analysis of imperfect single-walled carbon nanotubes under axial compressive loads, International Journal of Structural Integrity, 6(4), 1-17, 2015.

K.N. Spanos, S.K. Georgantzinos, N.K. Anifantis, Mechanical properties of graphene nanocomposites: A multiscale finite element prediction, Composite Structures, 132, 536-544, 2015.

G.I. Giannopoulos, S.K. Georgantzinos, Mechanical Characterization of Boron-Nitride Nanoribbons via Nonlinear Structural Mechanics, Journal of Nano Research, 40, 58-71, 2016.

G.I. Giannopoulos, D.-P.N Kontoni, S.K. Georgantzinos, Efficient FEM simulation of static and free vibration behavior of single walled boron nitride nanotubes, Superlattices and Microstructures, 96, 111-120, 2016.

S.K. Georgantzinos, G.I. Giannopoulos, A. Fatsis, N.V. Vlachakis, Analytical expressions for electrostatics of graphene structures, Physica E, 84, 27-36, 2016.

S.K. Georgantzinos, G.I. Giannopoulos, N.K. Anifantis, Coupled thermomechanical behavior of graphene using the spring-based finite element approach, Journal of Applied Physics, 120, 014305, 2016.

S.K. Georgantzinos, S. Markolefas, G.I. Giannopoulos, D.E Katsareas, N.K. Anifantis, Designing pinhole vacancies in graphene towards functionalization: Effects on critical buckling load, Superlattices and Microstrures, 103, 343-357, 2017.

S.K. Georgantzinos, G.I. Giannopoulos, N.K. Anifantis, Thermoelastic Analysis of Graphene-Based Nanomaterials, Journal of Computations & Modelling, 7(1), 1-14, 2017.

G.I. Giannopoulos, S.K. Georgantzinos, Establishing detection maps for carbon nanotube mass sensors: Molecular versus continuum mechanics, Acta Mechanica, 228(6), 2377-2390, 2017.

S.K. Georgantzinos, I. Giannikos, A modeling framework for incorporating DEA efficiency into set covering, packing and partitioning formulations, International Transactions in Operational Research, DOI:10.1111/itor.12409, 2017.

S.K. Georgantzinos, A new finite element for an efficient mechanical analysis of graphene structures using CAD/CAE techniques, Journal of Computational and Theoretical Nanoscience, 14, 5347-5354, 2017.

G.I. Giannopoulos, S.K. Georgantzinos, Tensile behavior of gallium nitride monolayer via nonlinear molecular mechanics, European Journal of Mechanics A/Solids, 65, 223-232, 2017.

A.S. Tsiamaki, S.K. Georgantzinos, G.I. Giannopoulos, N.K. Anifantis, Prediction of the mechanical energy storage of single walled carbon nanotubes using an atomistic modeling method, Journal of Computational and Theoretical Nanoscience, 14, 5606-5616, 2017.

S.K. Georgantzinos, G.I. Giannopoulos, Thermomechanical buckling of single walled carbon nanotubes by a structural mechanics method, Diamond and Related Materials, 80, 27-37, 2017.

S.K. Georgantzinos, A CAD/CAE Approach for an Efficient Analysis of Contact Mechanics in Rolling Bearings, Journal of Applied Mathematics & Bioinformatics, 8(2), 65-82, 2018.

G.I. Giannopoulos, S.K. Georgantzinos, A.S. Tsiamaki, N.K. Anifantis, Multiscale simulation of fullerene reinforced composite structures: From molecular dynamics to finite element continuum mechanics, MATEC Web of Conferences 188, 01013, 2018.

K.P. Stamoulis, S.K. Georgantzinos, G.I. Giannopoulos, A model of low-velocity impact damage assessment of laminated composite structures, MATEC Web of Conferences 188, 01012, 2018.

G.I. Giannopoulos, S.K. Georgantzinos, A.S. Tsiamaki, N.K. Anifantis, Combining FEM and MD to simulate C60/PA-12 nanocomposites, International Journal of Structural Integrity, 10 (3), 380-392, 2019.

K.P. Stamoulis, S.K. Georgantzinos, G.I. Giannopoulos, Damage Characteristics in Laminated Composite Structures Subjected to Low-Velocity Impact, International Journal of Structural Integrity, (accepted) 2019.

S.K. Georgantzinos, The role of multi-scale finite element methods in analysis and design of advanced mechanical and aerospace structures, International Journal of Mechanical and Production Engineering Research and Development, 9(4), 805-808, 2019.

S. Markolefas, T.K. Papathanasiou, S.K. Georgantzinos, p-Extension of C0 Continuous Mixed Finite Elements for Plane Strain Gradient Elasticity, Archives of Mechanics, 71 (6), 567-593 2019.

S.K. Georgantzinos, K. Kariotis, G.I. Giannopoulos, N.K. Anifantis, Mechanical properties of hexagonal boron nitride monolayers: Finite element and analytical predictions, Journal of Mechanical Engineering Science, 234 (20), 4126-4135 2020.

S.K. Georgantzinos, S.I. Markolefas, S.A. Mavrommatis, K.P. Stamoulis, Finite element modelling of carbon fiber-carbon nanostructure-polymer hybrid composite structures, MATEC Web of Conferences. EDP Sciences, 02004 2020.

G.I. Giannopoulos, S.K. Georgantzinos, N.K. Anifantis, Thermomechanical Response of Fullerene-Reinforced Polymers by Coupling MD and FEM. Materials 13, 4132 2020.

S.K. Georgantzinos, G.I. Giannopoulos, N.K. Anifantis, Vibration Analysis of Carbon Fiber-Graphene-Reinforced Hybrid Polymer Composites Using Finite Element Techniques. Materials 13, 4225 2020.

S.K. Georgantzinos, K.P. Stamoulis, S.I. Markolefas, Mechanical Response of Hybrid Laminated Polymer Nanocomposite Structures: A Multilevel Numerical Analysis. SAE International Journal of Aerospace, 13(2), 1-14, 2020.

S.K. Georgantzinos, S.G. Siampanis, Size-dependent elastic mechanical properties of γ-graphyne structures: A comprehensive finite element investigation. Materials & Design 202, 109524 2021.

G.I. Giannopoulos, S.K. Georgantzinos, Thermomechanical Behavior of Bone-Shaped SWCNT/Polyethylene Nanocomposites via Molecular Dynamics. Materials, 14(9), 2192 2021.

S.K. Georgantzinos, Editorial for the Special Issue on Characterization and Modelling of Composites. Journal of Composites Science, 5(2), 2021.

S.K. Georgantzinos, G.I. Giannopoulos, P.A. Bakalis, Additive Manufacturing for Effective Smart Structures: The Idea of 6D Printing. Journal of Composites Science, 5(5), 119 2021.

S.K. Georgantzinos, P.A. Antoniou, S.I. Markolefas, A Multi-Scale Method for Designing Hybrid Fiber-Reinforced Composite Drive Shafts with Carbon Nanotube Inclusions, Journal of Composites Science, 5(6), 157 2021.

S.K. Georgantzinos, P.A. Antoniou, S.I. Markolefas, Design of laminated composite plates with carbon nanotube inclusions against buckling: Waviness and agglomeration effects,Nanomaterials, 11(9), 22612021.

G.I. Giannopoulos, S.K. Georgantzinos, A Tunable Metamaterial Joint for Mechanical Shock Applications Inspired by Carbon Nanotubes. Applied Sciences, 11, 11139 2021.

S.G. Siampanis, G.I. Giannopoulos, N.D. Lagaros, A. Hatziefremidis, S.K. Georgantzinos, Nonlinear Finite Element Analysis of γ-Graphyne Structures under Shearing. Molecules, 27(5), 1729 2022.

S.K. Georgantzinos, S.G. Siampanis, A. Baldoukas, G.I. Giannopoulos, Designing the nonlinear mechanical response of graphyne structures: A finite element structural mechanics approach. Materials Today Communications, 31, 103386 2022.

S.K. Georgantzinos, P.A. Antoniou, S.I. Markolefas, G.I. Giannopoulos, Finite element predictions on vibrations of laminated composite plates incorporating the random orientation, agglomeration, and waviness of carbon nanotubes, Acta Mechanica, 233(5), 2031, 2022.

N. Rogkas, C. Vakouftsis, V. Spitas, N.D. Lagaros, S.K. Georgantzinos, Design Aspects of Additive Manufacturing at Microscale: A Review, Micromachines, 13(5), 775, 2022.

S.K. Georgantzinos, Multiscale Simulation of Composite Structures: Damage Assessment, Mechanical Analysis and Prediction. Materials, 6(9), 274, 2022.

S.K. Georgantzinos, Editorial for the Special Issue on Characterization and Modelling of Composites, Volume II. Journal of Composites Science, 6(9), 274, 2022.

G.I. Giannopoulos, S.K. Georgantzinos, E. Ghavanloo, Exploring the energetics and structural properties of a new carbon allotrope family named α-fullerynes, Diamond and Related Materials, 129, 109375, 2022.

A.D. Tseni, P. Sotiropoulos, S.K. Georgantzinos, Optimization of quality, reliability, and warranty policies for micromachines under wear degradation, Micromachines, 13(11), 1899, 2022.S.K. Georgantzinos, Editorial for the Special Issue on Micro/Nano Structures and Systems: Analysis, Design, Manufacturing, and Reliability. Micromachines, 14, 253, 2023.

S.K. Georgantzinos, Editorial for the Special Issue on Micro/Nano Structures and Systems: Analysis, Design, Manufacturing, and Reliability. Micromachines, 14, 253, 2023.

S.K. Georgantzinos, P.A. Antoniou, C. Spitas, A multi-scale computational framework for the hygro-thermo-mechanical analysis of laminated composite structures with carbon nanotube inclusions, Results in Engineering, 17 100904 2023.

A.D. Tseni, S.K. Georgantzinos, C. Papadopoulos, I. Giannikos, Developing Quantitative Methods for Quality and Maintenance Management in Micro-Electromechanical Systems, International Journal of Advanced Research in Technology and Innovation, 3, 1-7, 2023.

S.K. Georgantzinos, S.G. Siampanis, N. Rogkas, V. Spitas, The Effect of Hole Geometry on the Nonlinear Nanomechanics of γ-Graphyne Structures: A Finite Element Analysis. International Journal of Molecular Sciences, 24(19), 14524, 2023.

S.K. Georgantzinos, Characterization and Modelling of Composites, Volume III. Journal of Composites Science, 7, 446, 2023.

S.K. Georgantzinos, S.I. Markolefas, A. Fatsis. Effects of rotation on the electrostatic properties of graphene in a semi-infinite space. Materials Today Communications, 38, 108280, 2024.

G. Kostopoulos, K. Stamoulis, V. Lappas, S.K. Georgantzinos. Shape Morphing of 4D-Printed Polylactic Acid Structures under Thermal Stimuli: An Experimental and Finite Element Analysis. Aerospace, 11(2), 134, 2024, 2024.

S.K. Georgantzinos, P.A. Antoniou, K.P. Stamoulis, C. Spitas. Influence of microstructural and environmental factors on the buckling performance of carbon nanotube-enhanced laminated composites: A multiscale analysis. Engineering Failure Analysis, 108055, 2024.

S.K. Georgantzinos, G. Kostopoulos, K.P. Stamoulis. Characterizing the shape-morphing behaviour of 4D printed PLA structures. In Journal of Physics: Conference Series (Vol. 2716, No. 1, p. 012034). IOP Publishing, 2024.

S.K. Georgantzinos, P.A. Antoniou, K.P. Stamoulis, C. Spitas. Buckling Prediction of MWCNT-reinforced Laminated Composite Structures under Hygro-Thermo-Mechanical Conditions. In Journal of Physics: Conference Series (Vol. 2692, No. 1, p. 012040). IOP Publishing, 2024.

S.K. Georganzinos, E. Sakellariou, A. Tseni, I. Giannikos. Integrating DEA, balanced scorecard, and Lean Six Sigma in a total quality model for strategic planning and improving organisation performance: a case study. International Journal of Six Sigma and Competitive Advantage, 15(1), 33-56, 2024.

S.K. Georgantzinos, A.D. Tseni, C. Papadopoulos, I. Giannikos. Integrated Optimization of Quality Control and Maintenance Policies for Light-Emitting Devices. International Journal of Reliability, Quality and Safety Engineering, 2024.

S. Markolefas, M. Guiggiani, S.K. Georgantzinos. A general nonlinear single-track model for curved flat or banked road paths: Identification of the vehicle handling DNA. International Journal of Non-Linear Mechanics, 104850, 2024.

S.K. Georgantzinos, G. Kastanos, A.D. Tseni, V. Kostopoulos, Efficient optimization of the multi-response problem in the Taguchi method through advanced data envelopment analysis formulations integration, Computers & Industrial Engineering, 197, 110618, 2024.

S.K. Georgantzinos, A.D. Tseni, C. Papadopoulos, I. Giannikos, Integrated Optimization of Quality Control and Maintenance Policies for Light-Emitting Devices, International Journal of Reliability, Quality and Safety Engineering, 31(06), 2024.

S.K. Georgantzinos, Size-dependent nonlinear mechanics of indium nitride nanosheets under tension: A spring-based finite element method, Physica B, 710, 41719, 2025.

S. Voulgaris, C. Kousiatza, G. Kazakis, K.I. Ypsilantis, D. Galanis, S.K. Georgantzinos, Upper limb orthoses: integrating topology optimization and 3D printing for custom fit and function, Applied Sciences, 15(2), 827, 2025.

P.A. Antoniou, S.I. Markolefas, G.I. Giannopoulos, N. Lagaros, S.K. Georgantzinos, Multiscale modeling of microstructural and hygrothermal effects on vibrations of CNT-enhanced fiber-reinforced polymer composites, Journal of Sound and Vibration, 596, 118733, 2025.

P.A. Antoniou, K.P. Stamoulis, S.K. Georgantzinos, Progressive damage and failure analysis of CNT-reinforced laminated nanocomposite structures: A multiscale modeling framework, Engineering Failure Analysis, 173, 109452, 2025.

S. K. Georgantzinos, E. Papadopoulou, and P. Bakalis, "Prediction of Anisotropic Mechanical Behavior in Fused Deposition Modeling-Printed Polylactic Acid Structures with Straight-Line Microstructure Using Taguchi Design," J. of Materi Eng and Perform, 2025.

S.K. Georgantzinos, G.I. Giannopoulos, N.K. Anifantis, Evaluation of vibrational characteristics of carbon nanotube resonators, Advanced topics in scattering and biomedical engineering, 8th International Workshop on Mathematical Methods in Scattering Theory and Biomedical Engineering, Editors A. Charalambopoulos, D.I. Fotiadis, D. Polyzos, World Scientific Publishing, pp. 133-140, 2008.

S.K. Georgantzinos, G.I. Giannopoulos, N.K. Anifantis, A spring-based finite element model for the prediction of the mechanical properties of carbon nanotubes and their composites, Computational Mechanics Research Trends, Editor H.P. Berger, Nova Science Publishers Inc, pp. 87-99, 2010.

S.K. Georgantzinos, N.K. Anifantis, Evaluation of mass sensing characteristics of single-walled carbon nanotubes, Advanced Topics in Scattering and Biomedical Engineering, Editors A. Charalambopoulos, D.I. Fotiadis, D. Polyzos, Hackensack, NJ: World Scientific Publishing Co. Pte. Ltd., pp. 337, 2010.

S.K. Georgantzinos, N.K. Anifantis, P.A. Kakavas, G.I. Giannopoulos, Numerical prediction of mechanical behavior of single walled carbon nanotube/rubber composites, Constitutive Models for Rubber VI, Editors G. Heinrich , M. Kaliske , A. Lion , S. Reese, Taylor & Francis Group, pp. 27-32, 2010.

S.K. Georgantzinos, N.K. Anifantis, An atomistic-based spring-mass finite element approach for vibration analysis of carbon nanotube mass detectors, Advances in Vibration Analysis Research, Editors Dr. Farzad Ebrahimi, Intech, pp. 115-138, 2011.

A.S. Bouboulas, S.K. Georgantzinos, N. K. Anifantis, Vibration Analysis of Cracked Beams Using the Finite Element Method, Advances in Vibration Engineering and Structural Dynamics, Editor Dr. Francisco Beltran-Carbajal, InTech, pp. 181-204, 2012.

N.K. Anifantis, S.K. Georgantzinos, G.I. Giannopoulos, P.A. Kakavas, Elastomer macrocomposites, Advances in Elastomers II - Advanced Structured Materials, Editors P.M. Visakh, S. Thomas, A.K. Chandra, A.P. Mathew, Springer, Volume 12, pp. 11-68, 2013.

S.K. Georgantzinos, N.K. Anifantis, Crack closure, Encyclopedia of Thermal Stresses, Editor Richard Hetnarski, Springer, pp. 774-779, 2014.

S.K. Georgantzinos, G.I. Giannopoulos, K.N. Spanos, and N.K. Anifantis, A heterogeneous discrete approach of interfacial effects on multi-scale modelling of carbon nanotube and graphene based composites, Modeling of Carbon Nanotubes, Graphene and their Composites (Springer Series in Materials Science), Editors Κ. Tserpes Ν. Silvestre, Nuno Volume 188, p.p. 83-109, 2014.

A.S. Tsiamaki, G.I. Giannopoulos, S.K. Georgantzinos, N.K. Anifantis, Computational characterization of nanostructured materials, Vassilios Papazoglou a Volume in His Honour, National Technical University of Athens, School of Naval Architecture & Marine Engineering Shipbuilding Technology Laboratory, Athens, 2016.

A.S. Tsiamaki, G.I. Giannopoulos, S.K. Georgantzinos, N.K. Anifantis, Finite Element Modeling of Nanotubes, Carbon Nanotube-Reinforced Polymers: From Nano to Macro, Editor R. Rafiee, Elsevier, 291-310, 2018.

S.K. Georgantzinos, On the mechanics of nanocomposite structures using multiscale computational techniques, Cryptography, Cyber-Security and Information Warfare, Editor Nicholas J. Daras, Nova Publishers, 2018.

S.K. Georgantzinos, Editorial for the Special Issue on Characterization and Modelling of Composites, Characterization and Modelling of Composites, Editor Stelios K. Georgantzinos, MDPI, Basel, 2022.

S.K. Georgantzinos, Editorial for the Special Issue on Characterization and Modelling of Composites, Volume II, Characterization and Modelling of Composites, Volume II, Editor Stelios K. Georgantzinos, MDPI, Basel, 2022.

S.K. Georgantzinos, P.A. Antoniou, S.I. Markolefas, A Multi-Scale Method for Designing Hybrid Fiber-Reinforced Composite Drive Shafts with Carbon Nanotube Inclusion, Characterization and Modelling of Composites, Volume II, Editor Stelios K. Georgantzinos, MDPI, Basel, 2022.

S.K. Georgantzinos, G.I. Giannopoulos, P.A Bakalis, Additive Manufacturing for Effective Smart Structures: The Idea of 6D Printing, Characterization and Modelling of Composites, Volume II, Editor Stelios K. Georgantzinos, MDPI, Basel, 2022.

S.K. Georgantzinos, Multiscale Simulation of Composite Structures: Damage Assessment, Mechanical Analysis and Prediction, Multiscale Simulation of Composite Structures: Damage Assessment, Mechanical Analysis and Prediction, Editor Stelios K. Georgantzinos, MDPI, Basel, 2022.

G.I. Giannopoulos, S.K. Georgantzinos, Thermomechanical Behavior of Bone-Shaped SWCNT/Polyethylene Nanocomposites via Molecular Dynamics, Multiscale Simulation of Composite Structures: Damage Assessment, Mechanical Analysis and Prediction, Editor Stelios K. Georgantzinos, MDPI, Basel, 2022.

S.K. Georgantzinos, G.I. Giannopoulos, S.I. Markolefas, Vibration Analysis of Carbon Fiber-Graphene-Reinforced Hybrid Polymer Composites Using Finite Element Techniques, Multiscale Simulation of Composite Structures: Damage Assessment, Mechanical Analysis and Prediction, Editor Stelios K. Georgantzinos, MDPI, Basel, 2022.

G.I. Giannopoulos, S.K. Georgantzinos, N.K. Anifantis, Thermomechanical Response of Fullerene-Reinforced Polymers by Coupling MD and FEM, Multiscale Simulation of Composite Structures: Damage Assessment, Mechanical Analysis and Prediction, Editor Stelios K. Georgantzinos, MDPI, Basel, 2022.

Giannopoulos, G. I., Georgantzinos, S. K., & Ghavanloo, E. (2022). Exploiting the Mechanical Behavior and Potentials of Graphyne Based Clusters via Atomistic Simulations. Reference Module in Chemistry, Molecular Sciences and Chemical Engineering, Elsevier. 2024.

P.A Kakavas, S.K. Georgantzinos, N.K. Anifantis, Use of the logarithmic strain measures for the development of a finite element procedure for new hyperelastic solids, Proceedings of 8th HSTAM International Congress on Mechanics, Patras, Geece, July 5-7, 2007.

S.K. Georgantzinos, G.I. Giannopoulos, N.K. Anifantis, Evaluation of Vibrational characteristics of carbon nanotube resonators, Proceedings of the 8th International Workshop on Mathematical Methods in Scattering Theory and Biomedical Engineering, Lefkada, Greece, September 27-29, 2007.

S.K. Georgantzinos, G.I. Giannopoulos, D.E. Katsareas, P.A Kakavas, N.K. Anifantis, Finite element simulation and characterization of nanostructured textiles, Proceedings of NATO Advanced Research Workshop on Textile Composites, Kiev, Ukraine, May 18-21, 2009.

S.K. Georgantzinos, G.I. Giannopoulos, D.E. Katsareas, P.A Kakavas, N.K. Anifantis, Finite element modeling of an interweaved single-walled carbon nanotube structure, Proceedings of NATO Advanced Research Workshop on Textile Composites, Kiev, Ukraine, May 18-21, 2009.

S.K. Georgantzinos, G.I. Giannopoulos, N.K. Anifantis, P.A. Kakavas, Numerical prediction of mechanical behavior of single walled carbon nanotube/rubber composites, Proceedings of the 6th European Conference on Constitutive Models for Rubber (ECCMR), Dresden, Germany, September 7-10, 2009.

S.K. Georgantzinos, G.I. Giannopoulos, N.K. Anifantis, P.A. Kakavas, Young's modulus prediction of CNT-reinforced composites incorporating interfacial adhesion conditions, Proceedings of the 3rd International Conference on Experiments / Process / System Modeling / Simulation / Optimization (3rd IC-EpsMsO), Athens, Greece, July 8-11, 2009.

S.K. Georgantzinos, N.K. Anifantis, Evaluation of mass sensing characteristics of single-walled carbon nanotubes, Proceedings of 9th International Workshop on Mathematical Methods in Scattering Theory and Biomedical Engineering, Patras, Greece, Octomber 9-11, 2009.

S.K. Georgantzinos, D.E. Katsareas, P.A Kakavas, N.K. Anifantis, A numerical investigation of graphene sheet stress-strain behavior, Proceedings of the 16th US National Conference of Theoretical and Applied Mechanics, Penn State University, June 27- July 3, Pensilvania, USA, 2010.

I. Giannikos, S. Georgantzinos, Enhancing demand covering models by exploiting data envelopment analysis (DEA) efficiency scores, Proceedings of EURO Working Group on Locational Analysis VIII, Napoli, Italy, April 28-30, 2010.

S.K. Georgantzinos, N.K. Anifantis, Applications of computational technology in the simulation of the behavior of nanostructured materials, Proceedings of 9th International Conference on Durability of Composite Systems, Patras, Greece, September 12-15, 2010.

K.N. Spanos, S.K. Georgantzinos, N.K. Anifantis, A numerical study of stress transfer in carbon nanotube reinforced polymer matrix composites, Proceedings of 9th International Conference on Durability of Composite Systems, Patras, Greece, September 12-15, 2010.

S.K. Georgantzinos, G.I. Giannopoulos, N.K. Anifantis, Τhe effect of imperfections on the vibrational behavior of single-walled carbon nanotubes, 2nd International Conference of Engineering Against Fracture, Mykonos, Greece, June 22-24, 2011.

K.N. Spanos, S.K. Georgantzinos, N.K. Anifantis, A numerical study of load transfer in graphene reinforced nanocomposites, 2nd International Conference of Engineering Against Fracture (ICEAF II), Mykonos, Greece, June 22-24, 2011.

S.K. Georgantzinos, K.N. Spanos, N.K. Anifantis, Limit Load Analysis of Graphene Sheets with Defects, 2nd International Conference of Engineering Against Fracture (ICEAF II), Mykonos, Greece, 22-24 June, 2011.

G.I. Giannopoulos, S.K. Georgantzinos, P.A. Kakavas, N.K. Anifantis, Elastic static and vibrational behaviour of fullerenes via a structural mechanics spring based method, Imagenano, Bilbao Exhibition Centre, Spain, April 11-14, 2011.

S.K. Georgantzinos, G.I. Giannopoulos, N.K. Anifantis, Εvaluation of effective mechanical properties of graphene-based nanocomposites using a multi-scale finite element approach, Mechanics of Nano, Micro and Macro Composite Structures, Politecnico di Torino, 18-20 June 2012.

S.K. Georgantzinos, N.K. Anifantis, Vibrational analysis of carbon nanotube based mass sensors: Analytical vs. Numerical predictions, International Conference on Computational & Experimental Engineering and Sciences, Crete, Greece, 30 April-5 May, 2012.

A.S. Tsiamaki, S.K. Georgantzinos, N.K. Anifantis, Vibrations of circular graphene mono-layer as mass sensor, International Conference on Computational & Experimental Engineering and Sciences, Crete, Greece, 30 April-5 May, 2012.

K.N. Spanos, S.K. Georgantzinos, N.K. Anifantis, Elastic modulus of graphene reinforced nanocomposite, 3rd International Conference of Engineering Against Fracture (ICEAF III), Kos, Greece, 24-26 June, 2013.

K. Kariotis, S.K. Georgantzinos, G.I. Giannopoulos, N.K. Anifantis, Effective mechanical properties of BN monolayer, International Conference of Engineering Against Failure (ICAEF III), Kos, Greece, June 26-28, 2013.

G.I. Giannopoulos, S.K. Georgantzinos, D.-P.N. Kontoni, P.A. Kakavas, Tensile behavior of boron-nitride nanoribbons via a non-linear spring based structural mechanics approach, 6th International Conference from "Scientific Computing to Computational Engineering (6th IC-SCCE), Athens, Greece, July 9-12, 2014.

P.K. Pierou, S.K. Georgantzinos, G.I. Giannopoulos, N.K. Anifantis, Buckling analysis of imperfect carbon nanotubes: A numerical investigation, 2nd International Conference on Airworthiness & Fatigue (8th ICSAELS), Patras, Greece, July 14-18, 2014.

S.K. Georgantzinos, G.I. Giannopoulos, N.K. Anifantis, Thermoelastic analysis of graphene-based nanomaterials, 3rd International Conference on Technology Trends and Scientific Applications in Artillery and other Military Science (TTSAAMS 2015), Nea Peramos Attikis, Greece, May 5-6, 2015.

G.I. Giannopoulos, D.-P.N. Kontoni, S.K. Georgantzinos, Αn efficient finite element technique for the vibrational behavior of single walled boron nitride nanotubes, 17th International Conference from "Scientific Computing to Computational Engineering" (7th IC-SCCE), Athens, Greece, 6-9 July, 2016.

S.K. Georgantzinos, On the mechanics of nanocomposite structures using multiscale computational techniques, 3rd International Conference on Cryptography, Cyber-Security and Information Warfare (3rd CryCybIW) Hellenic Military Academy, Greece, 26th - 27th May, 2016.

S.K. Georgantzinos, A CAD/CAE technique for an efficient prediction of bearings design fatigue life, Operational Planning, Technological Innovations and Mathematical Applications (OPTIMA), Greece, 25th - 26th May, 2017.

G.I. Giannopoulos, S.K. Georgantzinos, A.S. Tsiamaki, N.K. Anifantis, Multiscale simulation of fullerene reinforced composite structures: From molecular dynamics to finite element continuum mechanics, 5th International Conference of Engineering Against Failure (ICEAF) Chios Island, Greece, 20 - 22 June 2018.

K.P. Stamoulis, S.K. Georgantzinos, G.I. Giannopoulos, A model of low-velocity impact damage assessment of laminated composite structures, 5th International Conference of Engineering Against Failure (ICEAF) Chios Island, Greece, 20 - 22 June 2018.

A.S. Tsiamaki , S.K. Georgantzinos, N.K. Anifantis, Finite element analysis of gear tooth fracture, 3rd International Conference on Structural Integrity and Durability, Dubrovnik, 4 - 7 June, 2019.

S.K. Georgantzinos, S.I. Markolefas, S.A. Mavrommatis, K.P. Stamoulis, Finite element modelling of carbon fiber - carbon nanostructure - polymer hybrid composite structures, 2nd International Symposium on Aircraft Technology, MRO and Operations (ISATECH) Amsterdam, Netherlands, 9 - 10 October, 2019.

S.K. Georgantzinos, P.A. Antoniou, K. Stamoulis, C. Spitas, Buckling Prediction of Single-Walled Carbon Nanotube-Reinforced Laminated Composite Structures under Hygro-Thermo-Mechanical Conditions, 7th International Conference of Engineering Against Failure (ICEAF 2023), Spetses, Greece, 21-23 June, 2023.

A.D. Tseni, S.K. Georgantzinos, C. Papadopoulos, I. Giannikos, Developing quantitative methods for quality and maintenance management in micro-electromechanical systems, 4th International Conference on Management, Education, Social Sciences and Innovation 2023 (ICMESSI2023)), Kuala Lumpur, Malaysia, 8 July, 2023.

S.K. Georgantzinos, G.P. Kostopoulos, K.P. Stamoulis, Characterizing the shape morphing behavior of 4Dprinted PLA structures, 13th EASN International Conference on "Innovation in Aviation & Space for opening New Horizons", Salerno, Italy, 5-8 September, 2023.

P. Antoniou, S. Markolefas, K. Stamoulis, S. Georgantzinos, Microstructural effects on progressive damage of CNT-enhanced fiber-reinforced polymer composites, Tenth International Conference on Engineering Failure Analysis (ICEFA X), Athens, Greece, 7-10 July, 2024.

G. Kostopoulos, K. Asimakis, S. Georgantzinos, Thermal-Induced Morphing Behavior of 4D-Printed PETG Beams, 1st International Conference on ADDitively Manufactured OPTimized Structures by means of Machine Learning, Irbid-Jordan, 1-4 October, 2024.

P.A. Antoniou, S.K. Georgantzinos, Finite Element Analysis of Mechanical Vibrations in Fiber-Reinforced Laminated Nanocomposite Beams under Hygro-Thermo-Mechanical Conditions, 2nd Engineering and Applied Sciences Optimization International Conference, Irbid-Jordan, 1-4 October, 2024.

G. Dimitrakopoulos, G. Kostopoulos, N. Lagaros, S.K. Georgantzinos, Optimization of 3D Printing Parameters on Surface Roughness and Flatness of PLA Using Taguchi Design of Experiments, 1st International Conference on ADDitively Manufactured OPTimized Structures by means of Machine Learning, Irbid-Jordan, 1-4 October, 2024.

V.A. Karachaliou, S.K. Georgantzinos, Vehicle crash test simulation using the finite element method, 2nd Engineering and Applied Sciences Optimization International Conference, Irbid-Jordan, 1-4 October, 2024.

S. Georgantzinos, G. Papa, A continuum finite element-based micromechanical approach for the optimal material design of graphene-reinforced composites, 2nd Engineering and Applied Sciences Optimization International Conference, Irbid-Jordan, 1-4 October, 2024.

S.K. Georgantzinos, A. Koumentakou, I. Sideras, G. Kostopoulos, Experimental Mechanical Characterization of 3D Printed Structures Under Bending Loading, 1st International Conference on ADDitively Manufactured OPTimized Structures by means of Machine Learning, Irbid-Jordan, 1-4 October, 2024.

P. Georgopoulos, S. Georgantzinos, Structural Optimization of Additively Manufactured 1U CubeSat Frames, 2nd Engineering and Applied Sciences Optimization International Conference, Irbid-Jordan, 1-4 October, 2024.

P. Bakalis, E. Papadopoulou, S.K. Georgantzinos, Investigation of the Mechanical Behavior of PLA Structures Produced by FDM 3D Printing, 1st International Conference on ADDitively Manufactured OPTimized Structures by means of Machine Learning, Irbid-Jordan, 1-4 October, 2024.

G. Kostopoulos, K. Marneras, S. Georgantzinos, Characterizing Shape Changes in 4D-Printed ABS Beams Under Thermal Stimuli, 1st International Conference on ADDitively Manufactured OPTimized Structures by means of Machine Learning, Irbid-Jordan, 1-4 October, 2024.

S.K. Georgantzinos, A. Athanasiadis, Analysis, Design and Optimization of Lightweight Lattice Structured Spur Gears Using Finite Element Analysis, International Conference on ADDitively Manufactured OPTimized Structures (AMOSS), 2024.

S.K. Georgantzinos, A. Koumentakou, I. Sideras, G. Kostopoulos, Experimental Mechanical Characterization of 3D Printed Structures Under Bending Loading, International Conference on ADDitively Manufactured OPTimized Structures (AMOSS), 2024.

S.K. Georgantzinos, G.P. Papa, A Continuum Finite Element-Based Micromechanical Approach for the Optimal Material Design of Graphene-Reinforced Composites, International Conference on ADDitively Manufactured OPTimized Structures (AMOSS), 2024.

P. Bakalis, E. Papadopoulou, S.K. Georgantzinos, Experimental Investigation of the Mechanical Behavior of PLA Structures Produced by FDM 3D Printing, International Conference on ADDitively Manufactured OPTimized Structures (AMOSS), 2024.

G. Kostopoulos, K. Marneras, S.K. Georgantzinos, Characterizing Shape Changes in 4D-Printed ABS Beams Under Thermal Stimuli, International Conference on ADDitively Manufactured OPTimized Structures (AMOSS), 2024.

M.G. Tataris, A. Fatsis, S.K. Georgantzinos, Computational Design, Analysis and Experimental Investigation of the Behavior of 4D Printed Airfoils, International Conference on ADDitively Manufactured OPTimized Structures (AMOSS), 2024.

G. Dimitrakopoulos, G. Kostopoulos, N.D. Lagaros, S.K. Georgantzinos, Optimization of 3D Printing Parameters on Surface Roughness and FLatness of PLA Using Taguchi Design of Experiment, International Conference on ADDitively Manufactured OPTimized Structures (AMOSS), 2025.

G. Kostopoulos, S. Georgantzinos, Experimental and Numerical Investigation of Thermally Activated Shape-Morphing in 4D-Printed ABS Beams, 2025.

G. Dimitrakopoulos, S. Voulgaris, N. Lagaros, S. K. Georgantzinos, Critical Review: Influence of 3D Printing Parameters on Dimensional Precision and Surface Smoothness, Proceedings of the International Conferences on Digital Technology Driven Engineering, 2025.

P. Georgopoulos, S.K. Georgantzinos, Structural Optimization of Additively Manufactured 1 U CubeSat Frame, Proceedings of the International Conferences on Digital Technology Driven Engineering, 2025.

M.G.Tataris. Fatsis, S.K. Georgantzinos, Computational Design, Analysis and Experimental Investigation of the Behavior, Proceedings of the International Conferences on Digital Technology Driven Engineering, 2025.

S.K. Georgantzinos, A. Koumentakou, I. Sideras, Experimental Mechanical Characterization, Proceedings of the International Conferences on Digital Technology Driven Engineering, 2025.

S.K. Georgantzinos, G.P. Papa, Micromechanical Approach for the Optimal Material Design of Graphene-Reinforced Composites, Proceedings of the International Conferences on Digital Technology Driven Engineering, 2025.

G.Dimitrakopoulos, S. Voulgaris, N. Lagaros, S. Georgantzinos, Critical Review: Influecnce of 3D Printing Parameters on Dimensional Precision and Surface Smoothness, Proceedings of the International Conferences on Digital Technology Driven ..., 2025.

P. Georgopoulos, S.K. Georgantzinos, Structural Optimization of Additively …, Proceedings of the International Conferences on Digital Technology Driven …, 2025.

M.G.T., A. Fatsis, S.K. Georgantzinos, Computational Design, Analysis and Experimental Investigation of the Behavior, Proceedings of the International Conferences on Digital Technology Driven …, 2025.

S.K. Georgantzinos, A. Koumentakou, I. Sideras, Experimental Mechanical Characterization, Proceedings of the International Conferences on Digital Technology Driven …, 2025.

S.K. Georgantzinos, G.P. Papa, Micromechanical Approach for the Optimal Material Design of Graphene-Reinforced Composites, Proceedings of the International Conferences on Digital Technology Driven …, 2025.